▷ How to Change Dehumidifier Filter (+ Tips for Maintenance)

Changing dehumidifier filters and cleaning them is one of the ways to maintain effectiveness and also helps to increase the lifespan of the dehumidifier.

Sounds great, right? In reality, however, you may not know how important this is. Even when you do, you may not understand how to access or locate the filter.

After a while, you stop thinking about it and your Inventor dehumidifier keeps working for months with a filter filled with mold, mildew, and dust until it finally breaks down.

Luckily you won’t make that mistake if you are reading this post. We highlight everything you need to learn about how to change dehumidifier filter Inventor in detail below.

This post also covers other tips for maintaining and troubleshooting your Inventor dehumidifier.

Table of Contents

1 How Often Should I Change My Dehumidifier Filter?
2 Where Are the Filters on a Dehumidifier?
3 How to Change Dehumidifier Filter Inventor?
4 How to Clean Your Dehumidifier Filter?
5 Do You Have to Change Filter on Dehumidifier?
6 How to Change Dehumidifier Filter Inventor: Tips for Proper Maintenance
7 Frequently Asked Questions
8 Conclusion

How Often Should I Change My Dehumidifier Filter?

Inventor appliances recommend you clean your dehumidifier air filter either every 20 days or two to four weeks to keep mold, mildew, dust, and bacteria at bay. For Inventor dehumidifiers with active HEPA filters, the filter alert will blink to notify you to change the filter after several preset uses.

On other dehumidifier filters, like the Inventor 12L dehumidifiers, there is no filter alert system because the filter system is light and requires frequent cleaning to maintain its effectiveness.

For cases where the filter is damaged, you can contact the Inventor appliances service center for a replacement. Regularly cleaning your dehumidifier filter is the best way to ensure it doesn’t get dirty enough to cause significant damages.

Where Are the Filters on a Dehumidifier?

Generally, filters on portable dehumidifiers are close to the air inlet vents, placed between the air intake grill and the evaporator coil, ideal for capturing all pollutants, allergens, and dust particles. Inventor dehumidifiers do not deviate from this convention. All their end-user dehumidifiers have filters located behind the air intake grill.

Some models like the Inventor 12L Dehumidifier can only be accessed from the front, while others like the EVA II Pro 20L are accessed from the back.

The filters are also easily accessible. You don’t need any additional tools to pry the air grill open to access it. Placing it back inside the dehumidifier is similarly seamless, following the same method as when it was removed.

Now, for a step-by-step guide on how to change your Inventor dehumidifier filters.

How to Change Dehumidifier Filter Inventor?

Most Inventor dehumidifiers have their filter on the back with a locking mechanism holding it in place. Once you access the air intake grill, you can easily reach and change the filter. There are two main methods of removing the filters on Inventor dehumidifiers.

Firstly is the method on the Inventor care 12L dehumidifier:

Start by pulling out the water tank. Use both of your hands to pull the water tank from both sides of the dehumidifier.
Once removed, slide the dehumidifier backward to see one end of the filter extending downwards from the top of the dehumidifier clipped with a lock pin.
Press and engage the lock pin to free the dehumidifier from its position, and gently slide it out when it is free. That’s all it takes.
To re-insert the filter, slide the dehumidifier backward and gently slide it in, using the pin to lock it in place. You should hear a click when this happens.
Return the dehumidifier to its standing position to ensure the filter is not loose. If it falls, reposition the filter properly.
Once you fix the filter in place, return the water tank to the dehumidifier so you can start using it again.

The second method is to access the filter from the back after removing the grill cover. On the popular EVA II Pro 20L and the Wi-Fi versions, all you have to do is remove the back grill cover used as the air intake vent.

The filter is built into the grill cover, making it easy to remove and change. Most Inventor dehumidifiers use a similar design.

Those with dedicated HEPA filters have filters separate from the air intake grill cover and also have a mechanism that holds the filter in place.

How to Clean Your Dehumidifier Filter?

Gently remove the filter from the dehumidifier.
If the filter is relatively clean, use a vacuum cleaner to remove the dust and other particulate matter.
If the filter is dirty, use water and mild detergent to wash the filter.
Use a soft brush to clean the filter and brush off all the mold and dirt attaching to the filter.
Rinse the filter and leave no trace of detergent on the filter.
Dry the filter thoroughly before reinstalling it into the dehumidifier

Please note that you should never clean the filter inside the dehumidifier or apply water directly to the dehumidifier.

Do You Have to Change Filter on Dehumidifier?

If your dehumidifier uses a built-in active HEPA filter, you must change it after the manufacturer’s preset hours of repeated use or power consumption. These filters become less effective over time and will not effectively filter out microscopic pollutants, allergens, odors, and other particles after repeated use.

Regularly cleaning these filters will maintain their effectiveness so that you won’t have to replace them as often. Depending on your model, cleaning them can delay the replacing period from 3 months to 12 months. Check your operating manual to confirm the duration.

Alternatively, some models have a filter replacement indicator that blinks when the filter exceeds the preset hours. If your Inventor Dehumidifier uses a light filter that is not as effective as a HEPA filter, It only requires replacement when it is damaged.

Regularly clean both filters to ensure your indoor air quality is clean and healthy.

How to Change Dehumidifier Filter Inventor: Tips for Proper Maintenance

Changing and cleaning your dehumidifier filter is part of regular maintenance and helps to keep your dehumidifier in optimum condition. However, there are other maintenance tips and recommendations you should stick to for the best moisture level in your home.

Keep the Dehumidifier Clean

Don’t place any foreign items on the dehumidifier. Make sure it is kept clean and clean it twice a month. Unplug the dehumidifier and use warm water and mild detergent to clean it; use this opportunity to clean the air intake grill and filter as well. The system works effectively throughout its life as long as it is taken care of properly.

Never Toggle the Standby Button Quickly

Short-circuiting can quickly occur if you toggle the dehumidifier off and on very quickly. If you turn it off, wait between five and ten minutes before turning it on again.

Ensure Proper Ventilation Around the Dehumidifier

Ensure excellent conditions and give your dehumidifier enough space to extract air and return it freely into the room. Do not place the dehumidifier too close to the walls and neither should you place an object in front of it or on top of it to obstruct it.

Clean the Water Tank Regularly

The filters and the water tank are the two components that have the potential for mold growth, microbe infestation, and bacteria. The moisture of the water tank increases the potential for all the bacteria and germs to infest your tank and home. Please keep it clean with a microbe/germ remover.

Use the Humidistat Correctly

Setting the humidistat too high or too low can affect the dehumidifier’s efficiency. It can make the system harder to work and limit the rate of continuous dehumidification. Preferably, use the dehumidifier with a hygrometer if it doesn’t have an integrated one to monitor the room’s humidity levels.

Frequently Asked Questions

Where Should I Place the Dehumidifier?

For ideal moisture levels and best results, place your dehumidifier in a place with excess moisture, like the basement or the kitchen. You can also put it in a central area like a hallway to reduce humidity equally from all other surrounding rooms.

Can You Wash a Dehumidifier Filter?

Yes, you can wash a dehumidifier filter. However, don’t use any stiff brush or sponge to wash it. Instead, use a soft brush or cloth to clean it. If it’s not too dirty, use a vacuum cleaner to remove dust and dirt.

How Often Should You Change the Filter in a Dehumidifier?

You should change your filter when the filter alert indicator starts blinking for dehumidifiers with HEPA filters. If your system uses a light filtering system, it can only be changed when it is damaged. Still, you should clean your filter once every two to four weeks.

How Many Years Do Humidifiers Last?

Portable humidifiers (compressor dehumidifiers) with smart dehumidification can last between two to five years depending on their usage, and whole-home humidifiers can last for about five to ten years. Desiccant dehumidifiers have to be renewed frequently.

Conclusion

Sooner or later, you will need to change your Inventor dehumidifier and manage and maintain the unit to ensure it remains functional and effective.

You won’t have any problems if you have read this post because you will have learned how to change dehumidifier filter Inventor all on your own.

Similarly, you will know exactly how to clean the filter, along with the best maintenance tips to increase the effectiveness and lifespan of your dehumidifier.

With all of these tips, you should be all set to have your dehumidifier last as long as possible.

Related Products: